AirNav  
 
airports navaids fix Aviation Fuel airboss pilotshop
 985 users online  
This information may not be accurate or current and is not valid for navigation, flight planning, or for use in flight. Always consult the official publications for current and correct information. Check NOTAMS before flying. No warranty of fitness for any purpose is made or implied. If you find errors in the information provided, here is how to report them.

CLT - CHARLOTTE/DOUGLAS INTL

CHARLOTTE, NC

INSTRUMENT APPROACH TO RUNWAY 36R

APPROACH AIDS INFORMATION AS PUBLISHED ON 22 OCTOBER 2009

ILS/DME (CAT. IIIB) RWY 36R

Approach bearing

      Magnetic bearing: 003
          True bearing: 356
    Magnetic variation: 07W

Localizer information

                  Type: ILS/DME
             Frequency: 108.90 MHz
   Identification code: I-BQC  .. -... --.- -.-.
      Antenna location: 35-13-33.706N / 080-56-10.567W
          Course width: 4.92 degrees

Glide slope information

                  Type: STANDARD GLIDE SLOPE
     Glide slope angle: 3.00 degrees
      Antenna location: 35-12-14.003N / 080-55-58.895W
                        -1042 ft. in from approach end of runway 36R
Runway elevation at GS: 724.10 ft. MSL

DME information

               Channel: 026X (tune to 108.90 MHz)
  Transponder location: 35-13-33.737N / 080-56-13.648W

Outer marker information

                  Type: OUTER MARKER BEACON ONLY
                  Name: CARLN
              Location: 35-05-26.623N / 080-55-33.967W
                        6.8 nm (41200 ft.) from the approach end of runway 36R

Middle marker information

                  Type: MIDDLE MARKER BEACON ONLY
              Location: 35-11-40.262N / 080-56-00.797W
                        0.4 nm (2350 ft.) from the approach end of runway 36R

Inner marker information

                  Type: MARKER BEACON ONLY
              Location: 35-11-54.221N / 080-56-02.028W
                        0.2 nm (935 ft.) from the approach end of runway 36R

Remarks


 
Copyright © AirNav, LLC. All rights reserved. Privacy Policy  Contact