| | |
| | 535 users online
 |
This information may not be accurate or current and is not valid for navigation, flight planning, or for use in flight.
Always consult the official publications for current and correct information.
Check NOTAMS before flying.
No warranty of fitness for any purpose is made or implied.
If you find errors in the information provided, here is how to report them.
ITO - HILO INTL
HILO, HI
INSTRUMENT APPROACH TO RUNWAY 26
APPROACH AIDS INFORMATION AS PUBLISHED ON 22 OCTOBER 2009
ILS/DME (CAT. I) RWY 26
Approach bearing
Magnetic bearing: 259
True bearing: 270
Magnetic variation: 11E
Localizer information
Type: ILS/DME
Frequency: 110.70 MHz
Identification code: I-ITO .. .. - ---
Antenna location: 19-43-16.933N / 155-03-38.784W
Course width: 3.80 degrees
Glide slope information
Type: STANDARD GLIDE SLOPE
Glide slope angle: 2.60 degrees
Antenna location: 19-43-20.887N / 155-01-58.099W
-1213 ft. in from approach end of runway 26
Runway elevation at GS: 37.60 ft. MSL
DME information
Channel: 044X (tune to 110.70 MHz)
Transponder location: 19-43-13.742N / 155-03-39.505W
No outer marker/locator navaid
Middle marker information
Type: MIDDLE MARKER BEACON ONLY
Location: 19-43-16.900N / 155-01-08.800W
0.6 nm (3500 ft.) from the approach end of runway 26
No inner marker navaid
Remarks
- LOCALIZER UNUSABLE BEYOND 70 DEG EITHER SIDE OF CENTERLINE.
- ILS UNMONITORED WHEN ATCT CLSD.
- ILS CLASSIFICATION CODE: IA
